Protectakote 1 Litre Why should you choose Protectakote? ProtectaKote used as a Bedliner is the easy way to protect and improve safety. With no mixing or blending required, it can be easily applied to almost any surface including metal, concrete, wood, fibreglass, plastic and rubber leaving an attractive textured anti-slip finish that is resistant to impacts. ProtectaKote used as a Bedliner will not chip, flake or peel and is resistant to damage from petrol and most chemicals and solvents. It can withstand years of heavy duty use. There are many places on cars and trucks where Protecta-kote can make a huge difference not only to the safety of the vehicle, but also to prevent damage and rust. With its unique and attractive textured finish it can also greatly enhance the look of hard working vehicles. If you purchase the kit, the pack contains everything you need to cover a typical van bed (up to 6sq m) with 4L of paint for two coats. For big vans like a big transit we recommend to buy an extra litre of bedliner paint. The new UVR version (currently available in yellow) has all the same benefits as standard Protectakote but is 50% stronger, faster drying and has graeter resistance to discolouration. Protectakote 1 Litre Please Choose Colour Black - BL1L - 1 Litre £14.45 + v.a.t.Grey - GY1L - 1 Litre - 17.99 + v.a.t.Blue - BLUE1L - 1 Litre - 15.99 + v.a.t.Red - RD1L - 1 Litre - £17.99 + v.a.t. Green - GN1L - 1 Litre - 17.99 + v.a.t. Yellow UVR Version - YLUVR1L - £23.99 + v.a.t. Quantity:

Protectakote 4 Litre Kits Protectakote anti-slip paint Kits Ready to apply Protecta-kote bed liner kits. In addition to the standard one litre and 4 litre cans. Protecta-kote and Protectakote UVR can also be purchased in a ready-to-use kit which contains all the accessories needed (masking tape may be required) to coat 4 - 6 square metres which is the typical load-bed of one pick-up truck, 4x4 or delivery vehicle. Additional 1 litre tins can be purchased for larger load areas. The Protecta-kote kit contains: Four litres of Protectakote or Protectakote UVR protective coating One polypropylene foam rollers for easy application on corrugated load areas One spare roller refill One large abrasive pad to prepare the surface Two application brushes for corners and tight spots Complete step-by-step instructions Protectakote antislip (non-slip) paint will chemically bond to most surfaces leaving an extremely tough and flexible coating that is able to withstand impacts and is resistant to most solvents. Its granular rubber content gives it high traction (non-slip) properties and the polyurethane bonder makes it extremely hard wearing. Protectakote anti-slip paint offers a unique and exciting range of benefits that include: Tough and weather resistant. Non-abrasive and impact resistant Totally Flexible, will not chip, flake or peel Economical - will last for years Heat resistant Anti-slip (even in wet conditions) Bonds to most surfaces Easy to apply -brush, roller or spray Easy to repair - Will bond to itself so no need to remove before recoating Can be over-coated to match specific colour requirements High abrasion resistance Resistant to saltwater, fuels and most solvents Anti-Corrosive UV resistant - suitable for using indoors and outdoors Range of colours including Black, Grey, Blue, Red, Green and yellow Protectakote Kit Please Choose Colour Black - £65.95 + v.a.t.Grey - £76.99 + v.a.t.Blue - £68.45 + v.a.t.Red - £76.99 + v.a.t.Green - £76.99 + v.a.t. Yellow UVR Version - £64.99 + v.a.t. Quantity:

Van Guard All NEW Pipe Carrier from Van Guard. Rectangular. Black. Made from anodised aluminium to AA15. Aerodynamic end cap. Crash tested to maximum capacity to ECE Reg 17. Integrated locking mechanism. Supplied with 2 keys. Universal T slot fixing. Supplied with universal brackets. Technical Information: Dimensions: 158mm wide x 128mm high x 3030mm long. Weight: 12.8kg (without contents). Able to carry up to 60 x 15mm copper pipes weighing 50kg. To fit 3m pipes. WHY ARE THEY SO GOOD? Unique. Sleek stylish modern design. Anti corrosive. Lower running costs. Secure, safe storage. No padlocks to lose. Easy to fit. Fits most bars. Tailored to carry longer lengths. Protect your pipes and your profits. More pipe carrier for your money. FITTING Fitting time approximately 20-30 minutes. Detailed fixing instructions are supplied. Contains a universal T slot fixing. Supplied with universal brackets to fit most bars that are 20-50mm high and 20-60mm wide. Bars should not need drilling as a unique clamping system is provided. Can be fitted to other makes of bars. Please Choose Size Please Choose Size VG200-2 - 2 Metre £139.00 + v.a.t. VG300-3 - 3 Metre £159.99 + v.a.t Quantity:

RP12 Rhino Aluminium Pipe Carrier RP12 - 125mm Square Tube x 3 Metres Long With Locking Aerodynamic Nose Cones. This unique pipe carrier is manufactured from light but strong powder coated aluminium tubing, combined with tough aerodynamic, glass reinforced plastic end cones, to ensure minimal wind drag and maximum style. Both end cones are fitted with keyed alike, high quality stainless steel locking mechanisms. The practical dimensions of our Rhino Pipe Tube allow up to 54 of 15mm copper tubes to be easily transported. Internal Dimensions: Width - 125mm. Height - 125mm. Length - 3050mm. Mounting hardware supplied with this pipe carrier is suitable for use on all brands of roof bar, providing the bar dimensions are no smaller than 30mm wide x 20mm deep and no larger than 50mm wide x 40mm deep. Price: £125.99 (Excluding VAT at 20%) Quantity:

PLEASE NOTE if you are not a current FWC member you will be subject to an extra 20% Surcharge. Select the contact me for payment details option in the checkout for manual processing. To join the FWC got to http://www.f-w-c.co.uk and click the Join the Federation Link.